BEKO HLV-2000-222 (222-225 MHz) RF Power Amplifier




BEKO HLV-2000-222       222 MHz RF Power Amplifier

“Designed for Weak Signal, Tropo Scatter, Meteor Scatter, Digital, & Contest Operation!”

The BEKO HLV-2000-222  employs advanced German-engineered, solid-state technology to deliver instant on, no compromise performance.

The HLV-2000-222  is the ideal amplifier for contest, portable, EME & home station operation due to its small foot print and light weight.  BEKO amplifiers are “the best of the best” VHF UHF & SHF high-power linear amplifiers available worldwide!

HLV-2000-222 Features:

* Instant on, no warmup is needed.  Don’t miss the opening!

* No tuning required

* WSJT / FT8, Digital Mode at rated output

* New, super-fast, accidental-overdrive / spike protection up to 150W

* Built-in IMD indication

* Extremely High efficiency

* VSWR, overdrive and temperature protection

An integrated sequenced voltage to control external mast-mounted preamplifiers is provided. A built in Bias-T allows the preamp voltage to be injected onto the coaxial cable. For those preamplifiers that can’t be powered via the coax and require a separate DC cable, the sequenced voltage is available via a back panel connection.  As with all BEKO Elektronik amplifiers, a front panel switch allows the user to select external preamp on/off function thus allowing the preamplifier to be switched in-line or off-line.  See us for suitable mast-mounted preamplifiers.  The HLV-2000-222 provides a direct connection to the HPP-222 mast-mounted preamplifier (special order).  Note:  Antenna systems that have a DC short at the feedpoint require an external DC block at the antenna or the separate DC cable from the amplifier to power the preamplifier.

HLV-2000-222 Specifications:

Frequency range 222 – 225 MHz
RF output power > 2,000 W With 25 W drive
Modes SSB/CW/FM/Digital
Output devices NXP BLF188XR
1-dB Compression point > 1,950 W
Harmonics -75 dBc
Spurious -70 dBc
Return loss 20 dB
Max. VSWR 2.0:1 > Protective trip occurs
Efficiency > 75 % Typical
Weight 33 lbs 10.5 kg
Dimensions (metric) 300 x 170 x 470 (WHD) mm
Dimensions (US) 11.8 x 6.69 x 18 5 (WHD) in
Voltage requirements 180-260 Vac, 50/60 Hz For rated power
Voltage requirements 100-130 Vac, 50/60 Hz For half rated power
Operating environment -10 to +30 Deg. C

Additional information

Input Power Option

High Power Drive (20 W), Low Power Drive (1 mW)

HPP mast preamp

No, Yes


There are no reviews yet.

Be the first to review “BEKO HLV-2000-222 (222-225 MHz) RF Power Amplifier”

Your email address will not be published. Required fields are marked *